alignment laser

until the time users are in need of ultra clear and stable line indication for a lot of application fields, it might not be limited by long distance, high height and others etc. however, under operation with constant technical innovation of 650nm red laser diode tech, it has been created into a quite practically used device of a red laser line generator. it enables long lasting red laser beam and red reference line projection from laser beam aperture. whenever ultra compact size tube made 650nm red laser module gets proper mounting onto those of machine or device, either it is pointing at close or long distance, it always brings users a good direction, low price and long lasting red line indication for a lot of raw material processing works continuously.

designed with an ac/dc adapter, comparing with a simple red laser pointer only used for temporary dot positioning work, this 650nm red laser line generator is able to make long lasting red laser beam emission from beam aperture. it is merely effected by any working environments. when it accepts wide range electric current of 100v to 240v, after high efficiency conversion of 5v, 9v 1000ma dc power supply, it just makes sure of constant red laser beam emission at long extending distance. in addition, besides its formal use of close distance and inner room, this 650nm red laser module also makes quite satisfied red line instruction for long distance and formal lighting working occasion as well.

on condition that 650nm red laser line generator applies a qualified separate crystal lens within wide fan angles, it is able to project the best quality red laser light. it gets even brighter and visible red laser beam than formally equipped glass or plastic coated lens. in addition, when it gets high uniformity and high fineness red reference line within 0.5 meter to 6 meters, after its correct selection of output power and optic lens fan angle, this direct diode emission made 650nm red laser module is able to provide users quite satisfied line positioning results for laser cutting, saw mill, textile garment processing, lumber machine or others etc.

on condition that uniform beam 650nm red laser line generator gets special use of apc, acc driving circuit board design, within wide range output power of 5mw to 100mw, it is keeping work with constant red laser beam and red line indication at long extending distance. it enables long serving lifetime and reduced possibility of tube burning out or damage. when red alignment laser gets proper adjustment of line fineness and line emitting direction, within the greatest work distance of 25 meters and formal lighting working occasion, it brings users the best line alignment experience for all application fields perfectly.

In any type of high precision and high fineness line generation at different work distances, even though it is far more enough than formal hand reaching, it still brings users a low production cost and long lasting line alignment with a 650nm red laser line generator. It keeps work with intense red laser beam emission directly from a 650nm red laser diode. In any type of industrial and high tech precise machinery processing work fields, only after its correct use of output power and optic lens fan angle, this direct diode emission made 650nm red laser module just brings users quite easy reaching and long lasting red line indication for a lot of application fields effectively. 
When users are in need to make long lasting line generation, this 650nm red laser line generator should have to be made with good thermal emitting system. The basic use of an import 650nm red laser diode just achieves at least 40% improvement of laser beam stability. For the most important of all, after its special use of 16mm and 26mm diameter anodized aluminum alloy housing tube design for different output power, this 650nm red laser module just gets excellent thermal emitting and thermal stabilization, and achieves the most reliable red line alignment within long lasting work time of 10 hours per day. 
Under operation with a qualified glass coated lens within wide fan angles of 10 to 110 degree, cooperating with strict laser beam stability test up to 24 hours, the usual use of a 650nm red laser line generator obtains ultra fine and straight red reference line with various line lengths. In any type of industrial or high tech precise line positioning work field, once users are getting basic learning of required line length, line fineness and work distance, this direct diode emission made 650nm red laser module enables correct use of output power and optic lens fan angle, and ultra clear and fine line indication within long extending distance of 25 meters. 
On the basis of APC, ACC driving circuit board design, available with wide range output power of 5mW to 100mW, this 650nm red laser line generator is working well with constant output power and electric current supply, and long serving lifetime of more than 8,000 hours. Any time this alignment laser gets adjustment of laser line fineness, it is able to make the clearest line instrument for all precise machinery processing works. For the most important of all, any time it gets high power up to 50mW to 100mW, users should just take basic laser safety measure and wear proper laser safety goggles until achieving easy and free line measurement perfectly.

After generating highly intense and visible red laser beam emission directly from 650nm red laser diode, the real use of a 650nm red laser diode module is making a good job for those of industrial and high tech precise dot measuring work fields. It is applying an inner part of thermal emitting system inside different dimension metal housing tube. In practical industrial precise dot measuring work fields, only after correct use of output power and proper installation onto those of machine or device, this direct diode emission made 650nm red dot laser brings users easy reaching, good direction and high precision dot indication for a lot of raw material processing works effectively. 
The basic use of a 650nm red laser diode module has to work for a quite long time, for the most important of all, it should have to maintain its stable performance in long lasting use. The advanced use of an import 650nm red laser diode gets wide range output power of 5mW to 100mW. Cooperating with a metal heat sink cooling system inside different dimension metal housing tube, after proper use of 16mm diameter tube for low power laser, and 26mm diameter tube design for high power 650nm red dot laser up to 30mW to 100mW, it just achieves high level of laser light cycling use, and highly reliable red dot indication for a lot of raw material processing work fields. 
When there are a lot of working surfaces human hands cannot reach easily, this 650nm red laser diode module still shows its superiority. The advanced use of a durable anodized aluminum alloy housing tube enables wide range operating temperature stabilization and highly reliable red reference dot projection under any other harsh working occasion of mechanical moving or shocking as well. On the basis of a qualified glass coated lens, whatever output power it is selected, this glass coated lens made 650nm red dot laser keeps work with high quality red laser light source emission and ultra clear and precise red dot projection as long as 25 meters. 
According to the special use of APC, ACC driving circuit board design, available with wide range output power of 5mW to 100mW, this 650nm red laser diode module is working well with the most reliable dot alignment, and long serving lifetime of more than 8,000 hours. It gets no effect by increasing temperature, and reduced possibility of tube burning out or damage. When this industrial alignment laser gets proper use of output power and freely adjusted laser dot diameter, it gets highly concentrated red laser light source emission and increasing accuracy dot measurement at great distance. According to high attention to thermal energy hurt to eyes and proper wearing of laser safety goggles, it brings users no danger and no mistake use for all working occasions effectively. 

Owing to the easy use of an AC/DC adapter, not the same as any other manual dot projecting tool, the advanced use of a 650nm red laser diode module is always making continuous red laser beam emission from the beam aperture. In those of industrial and high tech precise dot measuring work fields, according to its correct use of output power and proper mounting onto any other industrial machine or device, this direct diode emission made 650nm red dot laser is able to provide users excellent dot aligning solution for all kinds of precise machinery processing works effectively.
The usual use of a 650nm red laser diode module is always working for a quite long time, thus it should have to maintain its stable and reliable dot projection in long lasting use. The basic use of an import 650nm red laser diode has just assured increasing laser beam stability of at least 40%. In any type of precise dot measuring work field, owing to the long developing history and mass production of 650nm red laser diode, the finished production of this dot laser alignment tool has just got quite low production cost, and highly reliable red reference dot projection for both of long lasting and long distance use.
On the basis of easy use of an AC/DC adapter, without spending extra time on battery change, this 650nm red laser diode module is always making continuous red laser beam emission continuously. On condition that it accepts wide range electric current of 100V to 240V, it just gets strong environmental stabilization. Available with wide range output power of 5mW to 100mW, equipping with good thermal emitting system, this industrial stabilized 650nm red dot laser has just achieved highly stable and reliable red dot projection. It gets wide applications for a large variety of industrial precise machinery processing works, including laser marking, laser engraving, drilling system, red laser sight, laser medical therapy and high tech etc. 
Being made with high duration metal housing tube with different dimension of 16mm and 26mm, this industrial stabilized 650nm red laser diode module enables the most convenient installation and the easiest reaching of red dot projection onto any raw material surface. The unique use of adjustable focus optic lens enables immediate red laser light source concentration, and efficient conversion of increasing accuracy and brightness red dot alignment in distance. Every time users are taking laser safety measure and wearing correct laser safety glasses, this industrial alignment laser still brings users easy and free use in all occasions perfectly.

No matter dot alignment work is processing at close or along distance, even though it is not easy to reach with manual dot projecting tool at all, however, it still makes a good job for users to operate a direct diode emission made device, such as a 650nm red laser diode module. Among all kinds of visible laser devices, owing to its long developing history and mature red laser diode tech, after its mass production, the basic use of this dot laser alignment tool has just got the lowest price and the most stable red reference dot projection for all kinds of precise machinery processing works effectively.
The usual use of a 650nm red laser diode module is always working for a quite a long time and still maintains its stable and reliable performance. As a result, the primary design of an import 650nm red laser diode has just assured increasing laser beam stability of at least 40% in real use. In addition, different from formal used air or water cooling system, this direct diode emission made 650nm red dot laser has just adopted a metal heat sink cooling system inside the durable anodized aluminum alloy housing tube. As a result, whenever it gets superior nice thermal emitting and thermal conductivity, after continuous dot alignment work within ten hours, it still gets high level of laser light cycling use and highly reliable red dot projection in long lasting use.
Being made with the most durable anodized aluminum alloy housing tube available with wide range output power of 5mW to 100mWs. This red laser diode module just adopts different dimensions to diameter of 16mm and 26mm diameter design in practical precise dot measuring work, it always gets excellent thermal conductivity. In addition within wide range operating temperature and any other harsh working occur including mechanical calibration or shocking etc this red dot laser still gets perfect protection of itself and maintains highly reliable rad projection for multiple application fields covering laser marking, laser engraving, red laser sight, laser medical therapy and lab experiment work etc.
In a lot of lab institutes and colleges, owning to its its ultra compact size design, this 650nm red laser diode module always enables easy and convenient use in any corner of the world. Being made with ACC, APC driving circuit board design, whatever output power it is selected, it always keeps works with constant output power and electric current supply. There is also no effect by increasing temperature and serious electric current impact as well. Once users are trying to take active laser safety measures and wearing correct laser safety googles, this alignment laser always brings the users the most secured and easiest use in all application fields effectively.

In process of high level of accuracy and precision line generation work, no matter it is pointing at close or long distance, it is always a good job for users to have a try of 532nm green laser line generator. The unique adoption of a qualified separate crystal lens and advanced 532nm green DPSS laser system are applied inside the durable metal housing tube. Only if this 532nm green laser module gets proper installation and adjustment to correct position, it just begins to work with highly precise and fine green line projection onto various working surfaces effectively. 
The usual use of a separate crystal lens 532nm green laser line generator is different from any other formal plastic or glass coated lens. Either it is pointing at close or long distance, owing to its high uniformity distribution green light source emission; it always keeps works with the same brightness line projection from the middle part towards both ends. As a result, even though 532nm green laser module is in need to make line projection at a quite long work distance, it still gets quite satisfied line positioning results as long as 25 meters and multiple lighting occasions as well.
According to the adoption of wide range fan angle of 10 to 93 degree Powell lens, either it is pointing at close or long distance, this uniform beam 532nm green laser line generator is projecting different line lengths within 0.5 to 6 meters. at the same time, owing to its low laser being divergence of less than 1mard and special TEM00 laser beam mode, it is able to work with ultra fine and clear green line projection. Once it is pointing at different work distances, this 532nm green line laser should gets correct selection of both output power and optic lens fan angle. It gets special use for those prominent colleges, institutes and labs. It just makes good job for excellent line alignment solution for experiments and industrial precise line positioning works, etc.
Within long distance line extending distance and long time precise line positioning work, with the assistance of a laser alignment mounting bracket, this separate crystal lens 532nm green laser line generator enables the most convenient installation and the easiest reaching of green line source onto any vertical or horizontal work surface. It just brings Users noncontact, no mistake and long lasting line projection at a quite long work distance. Users get no need to worry about real work distance, lighting occasion or any other harsh occasions etc. once this alignment laser makes a proper installation and adjustment of both line fineness and line indicating direction, only if it makes a long lasting line projection within 25 meters, it always makes sure of the best alignment solution for all application fields effectively.

What is a good solution for users to make clear and fine line alignment at various work distances? Among all available line measuring tools, a high purity light emitting tool of 635nm red line laser module always makes sure of easy reaching and long lasting line alignment onto various working surfaces. Being made with a qualified separate crystal lens with wide fan angles and good thermal emitting system inside durable metal housing tube, this laser line generator achieves good direction, high fineness and high accuracy red line alignment for all precise machinery processing works effectively.
This 635nm red line laser module applies an AC/DC adapter as electric power source. Not the same as a simple red laser pointer with alkaline battery power source, it is able to work with constant red laser beam emission from a 635nm red laser diode within 5mW to 100mW. Being made with a metal heat sink cooling system, it gets superior nice thermal emitting, and increasing laser beam stability within constant work time of 8 to 10 hours per day. For the most important of all, when red laser line generator is operating by skilled users, it just achieves superior nice laser light cycling use, and highly reliable line alignment under increasing temperature and serious electric current impact as well.
Owing to quite special use of a separate crystal lens within 10 to 93 degree, cooperating with a series of strict laser beam stability test up to 24 hours, this 635nm red line laser module is projecting the most special non Gaussian distribution red laser light emission. Whatever kind of working surface it is pointing, owing to its high uniformity red line emission up to 85%, either it is pointing at close or long distance, this laser line generator still keeps work with high fineness and high brightness red line emission in constant use.
Within freely installed distance of 3 meters, either adopting 16mm or 26mm diameter metal housing tube, this 635nm non gaussian red line laser module enables the most convenient installation, and the easiest reaching of red line alignment onto any raw material surface. The advanced use of APC, ACC driving circuit board assures reduced possibility of tube burning out or damage, and long serving lifetime of more than 8,000 hours. When high power alignment laser is selecting with high power up to 50mW to 100mW, after high attention to thermal energy hurt to eyes and proper wearing of laser safety goggles, it just brings users highly secured and free line measurement in long lasting use. 

Unless the use of any manual cross line drawing work, no matter it is pointing at close or long distance, it is operating easy and quick with an industrial stabilized device of 445nm blue crosshair laser module. It projects high quality blue laser light source and highly clear two perpendicular blue lines with accurate 90 degrees. On condition that ultra compact size tube made cross laser alignment gets proper installation and adjustment to correct position, not relying on any manual labor force input or prior cross line drawing work, it brings users high stability and high precision cross line measurement in long lasting use effectively.
This blue crosshair laser module applies an AC/DC adapter as electric power source. It gets no need to make battery change. When it applies an import 445nm blue laser diode within 50mW to 10mW, after its projection of highly visible blue laser beam at several miles far away, it also makes sure of highly clear blue vertical and horizontal lines generation within the maximum work distance of 25 meters and other formal lighting working occasions etc. In order to assure stable and reliable performance in long lasting use, it enables the maximum work time of 8 to 10 hours per day. After leaving enough time and space for tube cooling down, it just achieves excellent laser light cycling use, and no effect by overheating and over current impact in use. 
According to the use of qualified glass coated lens with different fan angles of 10, 15 and 110 degree, whatever kind of working surface it is pointing, this blue crosshair laser module keeps work with high transmittance blue laser light emission. It also generates highly straight and fine blue cross line source within 0.5 meter to 6 meters. It should be selecting with correct output power and glass lens degree. When it projects charming blue laser light from laser beam aperture, besides its formal use for industrial precise cross line measurement, this blue cross laser alignment also brings users ideal cross line source for military targeting, laser medical therapy, laser show, laser displaying, decoration and high tech etc.
Available with APC, ACC driving circuit board, whatever output power it is selecting, this blue crosshair laser module assures constant output power and electric current supply. It gets reduces possibility of tube burning out or damage, and long operating lifetime of more than 8,000 hours. On basis of high attention to powerful blue laser radiation and thermal energy hurt to human eyes, after correct wearing of laser safety goggles, any output power made blue alignment laser assures easy and secured cross line alignment in distance effectively. 

What is the best job for users to make highly clear dot measurement immediately? No matter it is pointing at close or long distance, it should be a very nice solution for users to try pro red dot laser alignment. It is projecting the purest red laser light from a 635nm red laser diode. Comparing with formal 650nm red laser diode, owing to its even lower laser beam divergence and at least 3 times brighter red laser light, this finished product of 635nm red laser module just keeps work with high purity red laser light emission and the most compact size red reference dot emission at various work distances.
Designing with an import 635nm red laser diode, not the same as a simple red laser pointer, this finished product of pro red dot laser alignment is keeping work with continuous red laser beam and red dot emission from laser beam aperture. It is getting at least 40% improvement of laser beam stability. At the same time, on basis of advanced use of a metal heat sink cooling system, whatever kind of working surface it is pointing, this direct diode emission made 635nm red laser module just gets at highly stable and reliable red reference dot projection within long lasting work time of 8 to 10 hours per day.
According to the use of an external AC/DC adapter, this pro red dot laser alignment just leaves even larger space for tube cooling down, which is also making continuous red laser beam and red reference dot projection from laser beam aperture. It is getting special use of extending electric wires for both laser diode module and DC power supply. In practical precise dot measuring work fields, it is not only making continuous red laser beam emission, but also keeping highly stable red dot emission under those of harsh occasion of overheating and over current impact etc. 
Any time pro red dot laser alignment gets different size tube diameter of 16mm and 26mm, available with wide range output power of 5mW to 100mW, this pro red dot laser alignment is working well with easy installation and quick red dot emission onto any raw material surface. It is making a noncontact and no track red reference dot projection for a lot of raw material processing works. At the same time, owing to its special design of adjustable focus optic lens, this red alignment laser just gets immediate focused red laser light and increasing accuracy red reference dot projection in long lasting use. When users are aware of powerful red laser radiation and reflection, and wearing correct laser safety goggles, it just brings users highly secured and accurate dot measurement for all application fields effectively.

If users are trying to clear and fine enough line measurement, not limited by long distance, high height and other complex working environment etc, it is operating easy and quick after the use of an intense beam emitting tool of 515nm green line laser alignment. It is performing with direct laser light emission directly from an inner 515nm green laser diode. On condition that it makes the best use of qualified optic lens with different fan angles and constant power source supply, this compact size tube made laser line generator just allows easy installation, and quick forest green line indication onto any raw material surface effectively.
The real line measuring work with 515nm green line laser alignment is always continuing for quite long time. It is in need to project highly clear green reference line onto different working surfaces. After the use of high quality glass coated lens or separate crystal lens, it is projecting high quality forest green laser light, and high linear quality forest green line within different lengths of 0.5 meter to 6 meters. After getting wide range fan angles of 10 to 110 degree, only after basic measurement and experiment of green line length, fineness and work distance, this 515nm green laser module just allows correct use of output power and optic lens degree, and makes sure of increasing accuracy and fineness forest green line alignment onto various working surfaces.
Whatever kind of working surface it is pointing, after the use of an external AC/DC adapter, this 515nm green line laser alignment is always making continuous forest green laser beam emission. It is employing an import 515nm green laser diode within 5mW to 50mW. Even though it gets quite high thermal consumption, only after its proper use of 5V, 9V 1000mA DC power supply, this 515nm green laser line generator always makes continuous forest green line emission at various work distances. Even though there is increasing temperature, however, once it makes constant line projection within 8 to 10 hours, it enables good laser light cycling use and no decay light performance in continuous use.
After the use of a laser alignment mounting bracket, even though some of working surface is not easy to reach, this compact size tube made 515nm green line laser alignment still makes easy line indication onto any vertical or horizontal surface. After correct use of output power and optic lens degree, and proper adjustment of laser beam focus, it gets concentrated green laser light and the most precise forest green alignment laser line projection in long time use. When users are aware of any thermal energy hurt to human eyes and wearing correct laser safety glasses, without eye exposure to beam aperture, high power green line laser makes safe and easy use constantly. 

In order to get highly clear and quick enough line measurement, even though it is processing at quite long work distance and other hard reaching places, it is always making good job after the use of a high intensity beam emitting device, such as a 515nm 30mW green line laser alignment. It is making sure of a high speed and high accuracy forest green line projection onto various working surfaces. In occasion that 515nm green laser module makes correct use of optic lens degree and proper mounting onto industrial machine or device, it makes sure of no mistake and no decay light forest green line indication at long work distance.

The special use of an external AC/DC adapter supports 515nm 30mW green line laser alignment with constant forest green laser beam and forest green reference line projection from beam aperture. In various industrial and high tech line measuring work fields, after its correct use of 9V 1000mA DC power supply, it is just assures constant forest green laser beam emission. It is also making quite satisfied line positioning results for a lot of application fields, including industrial laser line alignment, lab experiment, laser medical therapy device and other high tech work fields etc.

Any time 515nm 30mW green line laser alignment makes the best use of qualified glass coated lens and separate crystal lens, whatever kind of working surface it is pointing, it is performing with high linear quality and highly fine forest green reference line projection in distance. Whatever kind of working surface it is pointing, only after basic measurement and experiment of technical data, this green laser line generator enables correct use of optic lens degree within 10 to 110 degrees.

Whatever kind of working surface it is pointing, this 26mm diameter tube made 30mW 515nm green line laser alignment enables the most convenient installation, and easy forest green line projection onto any vertical or horizontal surface. When it makes proper adjustment of both laser beam focus and laser line projecting direction within three dimensions, without the use of sunlight, this alignment laser just makes sure of highly precise and fine line alignment for all precise device manufacturing works. At the same time, only after its high attention to any thermal energy hurt to human eyes and correct wearing of laser safety glasses, it assures high security and high fineness line alignment at long distance perfectly.

If dot measuring work is processing at various work distances, it is not easy to reach with a simple red laser pointer or other manual dot measuring tool. In order to make sure of easy and quick dot measurement at various work distances, without serious limitation of long distance, high height and other hard reaching places, it makes good job with 532nm green dot laser module. It is being made with an external electric power source and inner cooling system. Only if compact size tube made red laser alignment gets proper installation and adjustment to correct position, it just makes sure of easy and highly clear green reference dot projection at various work distances.
The real dot measuring work with 532nm green dot laser module is always continuing for quite long time, and also maintaining highly stable and reliable dot measurement. Being made with advanced 532nm green DPSS laser tech, and getting quite low laser beam divergence of less than 1mrad and special Tem00 laser beam mode, it is always getting quite small size green dot emission in use. It is only getting 0.3mm dot diameter at 10cm, and only 1mm to 2mm dot diameter at 2 meters work distances. Unless the use of sunlight, high power green laser alignment up to 50mW to 100mW is always making clear dot indication at great distance of 25 meters and other high lighting working occasions as well.
Being made with the best quality glass coated lens, after a series of strict laser beam stability tests and aging preventing tests up to 24 hours, this 532nm green dot laser module is performing with high transmittance and the most sensitive color green laser light emission. At the same time, being made with glass window in front of laser beam aperture, without any affect by any moisture or dust, it is just able to work with highly clear and stable dot generation, without any affect by harsh working occasions at all.
With the assistance of a laser alignment mounting bracket and extending electric wires, within the maximum installed distance of 3 meters, 532nm green dot laser module always makes easy and convenient dot indication onto any raw material surface. At the same time, it is able to work with highly stable dot indication within 8 to 10 hours, but also keeping work with stable performance under any other increasing temperature and serious electric current impact as well. When green alignment laser makes proper adjustment of laser beam focus, after correct wearing of laser safety glasses, it always makes easy and safe dot alignment in all occasions perfectly.

When the genuine line alignment is processing at quite longer work distance than formal hand reaching, it is not easy to reach with formal manual line printing or line drawing work. However, after constant technical innovation of 650nm red laser diode tech and qualified glass coated lens with different fan angles, it is being made into a quite practically used device of 650nm 50mW red line laser module. When it is projecting highly intense red laser beam from inner laser diode, after correct use of glass coated lens and proper mounting onto other industrial machine or device, this laser line generator just makes sure of highly fine and precise red line alignment at long work distance.
The real line alignment with 650nm 50mW red line laser module is processing onto different working surfaces, thus should have to work with good laser beam stability in long time use. Different from any square meter, blocking board or triangular meter, it is making easy and quick line emission after the use of an external AC/DC adapter. When it is accepting wide range electric current of 100V to 240V, only after its correct use of 9V 1000mA DC power supply, this red laser line generator just assures continuous red laser beam emission, and highly clear red line alignment at quite long work distance of 25 meters and formal lighting working occasions etc.
Whatever kind of working surface it is pointing, in order to get precise enough red line alignment at quite long work distance, 50mW 650nm red line laser module applies qualified glass coated lens. It is getting much better performance than formal plastic coated lens, but also getting no appearance of laser light decay or blur in continuous use. When it gets wide range fan angles of 10 degree to 110 degree, after production of various line lengths of 0.5 meter to 6 meters, this red laser line generator just achieves highly precise red line alignment for multiple application fields, including laser cutting machine, sand milling, lumber machine and other high tech works etc.
Any time 650nm 50mW red line laser module is pointing onto various working surfaces, red line laser module should only be selecting correct optic lens degree. At the same time, after quite easy adjustment of alignment laser beam focus, this red alignment laser gets immediate red laser light concentration and efficient conversion of highly fine red line in distance. The genuine red line alignment gets highly stable performance within constant work of 8 to 10 hours per day. At the same time, after high attention to powerful thermal energy hurt to eyes and wearing correct laser safety goggles, without any eye exposure to laser beam aperture, high power red line laser makes sure of highly secured and fine line alignment in all occasions perfectly.

Whenever line alignment work is processing with a long wavelength made 808nm infrared line laser module, not getting any barrier of night version, it is just an easy and quick job to make clear and accurate enough IR reference line projection under all night vision fields. It is getting even longer wavelength than any other visible laser devices. In practical IR line alignment work, this infrared laser line generator should only be equipping with an external DC power supply, after proper installation and adjustment of both line fineness and line projecting direction, it just makes sure of extremely fine and clear enough IR line alignment in distance.

The usual use of 808nm infrared line laser module is pointing onto various working surfaces, thus always trying to work with different line lengths and line finenesses. It is applying the most qualified glass coated lens with different fan angles. Whatever kind of working surface it is pointing, it is performing with high quality and high photoelectric infrared laser light emission from beam aperture. In addition, whatever kind of working surface it is pointing, it is projecting high linear quality IR reference line with different IR line lengths. When it gets freely selected fan angles of 10 degree to 110 degree, it is able to work with the most precise IR line positioning results for all precise device manufacturing works.

When 808nm infrared line laser module is pointing onto various working surfaces, it should have to work with super strong environmental stabilization. The employment of metal heat sink cooling system is configured with durable aircraft used aluminum alloy housing tube. In continuous IR line alignment work, it gets superior nice thermal conductivity, and extremely stable IR line projection within wide range operating temperature. In addition, usually within wide range operating temperature, under low or high temperature, infrared laser line generator is maintaining highly intense IR laser light and extremely fine IR line positioning result.

According to the use of APC, ACC driving circuit board, under operation with constant output power and electric current supply, 808nm infrared line laser module is always working without any laser tube burning out or damage. Within daily continuous IR line alignment of 8 to 10 hours, it is able to work with good laser light cycling use and up to 85% laser beam stability. When it makes quite easy screw of adjustable focus optic lens and immediate IR laser light concentration, this infrared alignment laser makes sure of the finest IR line alignment in use. Only if it gets high attention to any thermal energy hurt from invisible IR laser beam, after correct use of infrared laser safety goggles, it makes secured and quick line alignment in all occasions.

If users are trying to make fine and straight enough line positioning results, even though it is not easy to reach with manual line printing device, there is just no need for laser tech engineer to develop a quite practically used device, such as a 635nm 50mW red laser line generator. It is performing much better than formal red laser pointer. When it is trying to make clear and fine enough red reference line from beam aperture, this red line laser module is just equipping with good cooling system and qualified separate crystal lens. Whenever it is generating highly uniform red line with different line lengths, after correct selection of optic lens degree and proper adjustment of laser beam focus, it always makes sure of high fineness and high accuracy red line alignment in all occasions effectively.
When 635nm 50mW red laser line generator applies import 635nm red laser diode tech, it is just getting at least 40% improvement of laser beam stability than formal laser device. It is always making good use of metal heat sink cooling system inside its durable aircraft used aluminum alloy housing tube. Even though it is pointing under quite harsh working occasion of moving or shocking, this red line laser module is still generating highly clear and stable red laser beam and red reference line within wide range operating temperature as well. It is getting superior nice thermal conductivity, only if it is keeping work within 8 to 10 hours, it gets superior nice thermal emitting and extremely stable line alignment performance in continuous use.
After the use of the best quality separate crystal lens, whatever kind of working surface it is pointing, 635nm 50mW red laser line generator is performing with non Gaussian distribution red laser beam and highly fine red line in use. It is performing with the same brightness red line from middle part towards both ends. When it makes proper selection of optic lens degree, it is just getting even more visible and brighter red line in distance, also getting no appearance of laser light decay or blur in long time work.
According to basic measurement and experiment of technical data, 635nm 50mW red laser line generator enables freely selected fan angles within 0.5 meter to 6 meters, and then making quite satisfied line positioning results for various industrial and high tech line positioning works etc. Whatever kind of working surface it is pointing, after quite easy adjustment of laser beam focus and laser line projecting direction within three dimensions, this alignment laser achieves the finest red line generation in distance immediately. After high attention to any thermal energy hurt to human eyes and correct wearing of laser safety goggles, high power red line laser makes safe and no mistake line alignment in all occasions.

In any type of clear and fine enough line projection at quite long work distance, it not workable at all to only rely on manual line printing or line drawing works. On constant work on the most advanced 532nm green DPSS laser tech and qualified optic lens with different fan angles, it is manufacturing into a quite practically used device of 100mW green line laser alignment. Any time this laser line generator makes correct selection of optic lens degree and proper equipment onto any other machine or device, it is making sure of high speed and high level of accuracy green line projection onto various working surfaces.

The genuine use of 100mW 532nm green line laser alignment is always continuing for quite long time, while still have to maintain good laser beam stability in continuous use. It is designing with super strong industrial stabilization. It generates super powerful and intense green laser beam from beam aperture. When green laser module is adopting metal heat cooling system, configured with durable aircraft used aluminum alloy housing tube with 26mm diameter, it is always getting superior nice thermal emitting, and extremely stable green reference line projection in continuous use.

When 100mW green line laser alignment applies the best quality optic lens, either glass coated lens or separate crystal lens, it is just assuring high transmittance green laser beam emission and high linear quality green line projection in distance. It is projecting gaussian beam or non Gaussian distribution green laser beam, after production of various optic lens degree of 10 degree to 110 degree, this green laser line generator is projecting various line lengths and line finenesses onto various working surfaces. When it makes basic measurement and experiment of technical data, after correct selection of optic lens degree, it makes sure of extremely fine and clear line measuring result as long as 25 meters.

Whatever kind of working surface it is pointing, including other complex working environments, 100mW 532nm green line laser alignment enables the most convenient use. It is operating as an accessory part, with the assistance of laser alignment mounting bracket and extending electric wires, within the maximum installed distance of 3 meters, this industrial alignment laser makes easy and convenient green line projection onto any vertical or horizontal surface. Only according to high attention to any thermal energy hurt to human eyes, after correct wearing of laser safety glasses, this industrial stabilized high power green line laser makes safe and no track measurement.

Whenever dot alignment is processing under night vision, always not easy to reach by manual dot projecting device of simple sticker, laser pointer or other visible laser pointer device, it should be much efficient solution to make good use of a long wavelength made 808nm infrared dot laser alignment. This night vision applied infrared laser module is not able to use separately. Only if it is operating with night vision device, after special use of an external DC power supply and good sue of internal cooling system, it makes sure of highly intense infrared laser beam emission and highly clear infrared reference dot projection under night vision effectively.
Owing to quite special use of import 808nm infrared laser diode, not the same as simple infrared laser pointer, this 808nm infrared dot laser alignment is trying to work with even longer time IR dot projection, while still maintaining highly stable performance in continuous use. It is adopting 16mm or 26mm diameter aluminum alloy housing tube, designed with internal metal heat sink cooling system, the genuine infrared laser dot projection is not affecting by increasing temperature, but maintaining highly stable IR dot generation in multiple night vision fields. Any time compact structure made infrared laser module gets proper installation and adjustment to correct position, it just assures highly stable IR dot generation under mechanical moving or shocking etc.
After good configuration with qualified glass coated lens, without any laser light decay or dim in continuous use, 808nm infrared dot laser alignment makes sure of high photoelectric ability infrared laser beam emission and highly clear IR reference dot projection onto various targeting surfaces. It is pointing into various working occasions, such as night hunting, infrared laser sight, military targeting and surveillance etc. After quite special use of a glass window in front of laser beam aperture, 808nm infrared laser module is achieving super strong environmental stabilization, and highly stable infrared reference dot indication under any moisture or dust etc.
Within wide range output power of 10mW to 500mW, after special use of APC, ACC driving circuit board, 808nm infrared dot laser alignment is preventing any increasing temperature and serious electric current impact. The genuine infrared alignment laser dot projection is getting reduced possibility of tube burning out or damage, allowing highly stable dot generation and long lifetime in proper use. Whenever 808nm infrared laser module gets proper installation and adjustments of laser beam focus, after high attention to potential thermal energy hurt to human eyes and correct wearing of infrared laser safety goggles, it makes sure of safe and clear IR dot generation in all occasions.

What is your choice to make clear enough line alignment at a bit longer work distance? Your might think of an advanced line measuring tool, however, long distance line targeting is quite hard to assure its accuracy as expected. However, instead of the selection of formal plastic coated lens made laser line module, advanced separate crystal made green laser line generator has just substituted any other type of line drawing tool. It is always efficient enough to generate the most uniform and same brightness green laser line on all targeting surfaces clearly and accurately.

The application of green laser line generator is much more superior than formal equipped line measuring tool. The internal part of separate crystal lens has just made this line laser alignment much more different from any other simple equipped line device. When it gets the same brightness green laser line from middle part towards both ends, even though the real line alignment is processed at quite longer work distance, however, this green laser module is still efficient enough to get clear enough line positioning result as expected.
Besides formal lighting working environments, green laser line generator is also applicable for even longer work distance and higher lighting working conditions. Owing to its non Gaussian distribution green laser beam emission from internal part of separate crystal lens, green line laser module gets wide range laser lens degree within 10 to 93 degrees. When different line length is in need, users only need to select correct laser lens degree so as to get the clearest line laser alignment precisely and accurately.
Any time the larger size laser lens degree is selected, green laser line generator is able to generate even longer green reference line. Laser tech engineer has just mad test with a larger size laser lens degree of 93 degree green laser module, which can get the maximum line length as long as 6 meters. It is just an easy work for users to operate this continuous line positioning tool. Owing to its constant electric power supply from DC input power supply, selectable with 3V and 8.4V operating voltage, green laser module is always efficient enough to generate the brightest green reference line on all desired working surfaces efficiently.
Green laser line generator always gets super strong protection from interference and static, thus it is just making great work under all kinds of harsh working environment as well. When this line laser alignment is operated with extremely high power of up 50mW, besides its good performance for long distance and high lighting line measuring work, it might also generate extremely intense and powerful green laser beam. Users should just pay special attention to powerful green laser beam and remember to wear laser safety glasses thus getting secured line alignment precisely.

When users are trying to make dot measuring under super high lighting working environment, such as day light working occasion, it is extremely hard to get clear line alignment with a low power laser line generator. On basis of constant development of advanced laser tech, laser engineer has just made great technical innovation on green line laser alignment. When it is paying high attention to laser beam stability, in constant green laser line targeting work, it is always efficient enough to keep highly stable and reliable green reference line alignment on various working surfaces efficiently.

On basis of its high output power and middle wavelength of 532nm, 100mW green line laser alignment is projecting the most easily absorbed green laser light to human eyes. Unless it is being used under sunlight directly, green laser line targeting is workable for all kinds of high lighting and long distance work fields efficiently. At the same time, it is very important for users to take full control of line aligning distance. Otherwise, green alignment laser line targeting might not be visible and bright as expected.
In order to get quite clear and accurate line positioning on various working surfaces, 100mW green line laser alignment also employs the most advanced glass cylindrical lens or separate crystal lens. Instead of very common plastic coated laser made laser line generator, no matter long distance or high lighting line alignment works, green laser alignment tool is efficient enough to keep high linear quality. With the process of continuous green reference line targeting, green laser beam emitting is not affected at all, but still keeping its high straightness and fineness. A qualified configured green line laser module has no worry about laser beam becoming dim or blur in constant operation.
According to a series of quite strict laser beam stability tests, 100mW green line laser alignment is achieving high quality standard. In addition, a series of internal safety standard approval from FDA and CE has just made this laser line generator workable with extremely fine line positioning performance. When it gets wide range laser lens degree from 10 to 110 degree, green laser line is available with different line length and line thickness in use.
Under condition that users are selecting high power 100mW green line laser alignment, extremely intense green laser beam might be produced in constant line alignment works. Users should always remember to wear proper 532nm wavelength preventing laser safety glasses so as to get secured operation of line laser aligning work. It is getting the customized work distance of 3 meters. After proper installation and adjustment of alignment laser line targeting direction, this line laser is just the best working one.

When users are fallen into difficult of getting high precision dot positioning, it is no longer workable for users with simple red laser pointer. This laser pointer pen is always very easy and convenient to operate, however, according to very simple battery source supply, it begins to project high brightness red laser dot projection. However, owing to its serious limitation of dot alignment stability, users have begun to make dot projection with high brightness red dot laser alignment. On basis of its full consideration of metal heat sink cooling system, this dot laser module just supports continuous dot projection with high stability and high reliability.
From the very beginning of laser diode module design, 650nm red laser diode gets the longest development history. As a result, when high brightness red dot laser alignment is applied in various industrial dot positioning work, it is not only available with high stability and high reliability dot projection, but also ensuring its quite competitive price. According to very simple installation on desired working surfaces, this laser diode module begins to work easily.
On basis of the most mature 650nm red laser diode tech, 650nm red dot laser alignment is always available with extremely stable sand reliable performance. As a result, when it is designed with wide range of output power from 5mW to 100mW, this red laser module still keeps highly stable performance in continuous work. For instance, we have made test with a 50mW red dot laser module with continuous 8 hours dot projection. Its output power can keep high stability in continuous dot alignment, output power range level keeps stable within 50mW to 51mW.
In various industrial dot alignment works, red dot targeting might be workable on various working surfaces. When exact dot targeting working surface is in quite dark color, part of red laser beam might be absorbed, while light color work surface has no effect of work surfaces. As a result, in order to make sure of high brightness red alignment laser dot positioning result, users should pay high attention to surrounding working environment, thus making correct selection of output power, thus always getting bright and visible enough red reference dot projection efficiently.
When high power red dot laser alignment is being used in various working surfaces, users always get wide output power selection from 5mW to 100mW. Owing to its high configuration of glass cylindrical lens with wide lens degree from 10 degree to 110 degree, red laser dot always keeps high beam visibility. According to quite easy installation of industrial alignment laser device, users can easily get the most satisfied dot projection efficiently.